Why is oil called more viscous than water when we slip on oil more than we do on water












2












$begingroup$


If we were to throw some water on the floor then walk over it we may or may not slip but it wouldn't that be difficult to walk. If we repeat the same thing with oil we it would be harder to walk as me spread our legs and apply a force component of force tangential to the surface of the floor does this not mean that the layers of oil have less friction between them than compared to water.So why is oil said to be more viscous?



Another example is hair oil if we keep water in out palm it's not that slippery but with oil it's slippery even after we apply it to our hair. I've read some answers on reddit about this but I wasn't able to understand much.






fluid-dynamics viscosity







share|cite|improve this question









$endgroup$








  • 1




    $begingroup$
    Viscosity is resistance to flow, oil flows more slowly than water, hence its more viscous
    $endgroup$
    – Triatticus
    3 hours ago










  • $begingroup$
    Have you read the Wikipedia article on viscosity? en.wikipedia.org/wiki/Viscosity
    $endgroup$
    – PiKindOfGuy
    2 hours ago
















2












$begingroup$


If we were to throw some water on the floor then walk over it we may or may not slip but it wouldn't that be difficult to walk. If we repeat the same thing with oil we it would be harder to walk as me spread our legs and apply a force component of force tangential to the surface of the floor does this not mean that the layers of oil have less friction between them than compared to water.So why is oil said to be more viscous?



Another example is hair oil if we keep water in out palm it's not that slippery but with oil it's slippery even after we apply it to our hair. I've read some answers on reddit about this but I wasn't able to understand much.






fluid-dynamics viscosity







share|cite|improve this question









$endgroup$








  • 1




    $begingroup$
    Viscosity is resistance to flow, oil flows more slowly than water, hence its more viscous
    $endgroup$
    – Triatticus
    3 hours ago










  • $begingroup$
    Have you read the Wikipedia article on viscosity? en.wikipedia.org/wiki/Viscosity
    $endgroup$
    – PiKindOfGuy
    2 hours ago














2












2








2





$begingroup$


If we were to throw some water on the floor then walk over it we may or may not slip but it wouldn't that be difficult to walk. If we repeat the same thing with oil we it would be harder to walk as me spread our legs and apply a force component of force tangential to the surface of the floor does this not mean that the layers of oil have less friction between them than compared to water.So why is oil said to be more viscous?



Another example is hair oil if we keep water in out palm it's not that slippery but with oil it's slippery even after we apply it to our hair. I've read some answers on reddit about this but I wasn't able to understand much.






fluid-dynamics viscosity







share|cite|improve this question









$endgroup$




If we were to throw some water on the floor then walk over it we may or may not slip but it wouldn't that be difficult to walk. If we repeat the same thing with oil we it would be harder to walk as me spread our legs and apply a force component of force tangential to the surface of the floor does this not mean that the layers of oil have less friction between them than compared to water.So why is oil said to be more viscous?



Another example is hair oil if we keep water in out palm it's not that slippery but with oil it's slippery even after we apply it to our hair. I've read some answers on reddit about this but I wasn't able to understand much.






fluid-dynamics viscosity




fluid-dynamics viscosity






share|cite|improve this question













share|cite|improve this question











share|cite|improve this question




share|cite|improve this question










asked 3 hours ago









HOME WORK AND EXERCISESHOME WORK AND EXERCISES

347




347








  • 1




    $begingroup$
    Viscosity is resistance to flow, oil flows more slowly than water, hence its more viscous
    $endgroup$
    – Triatticus
    3 hours ago










  • $begingroup$
    Have you read the Wikipedia article on viscosity? en.wikipedia.org/wiki/Viscosity
    $endgroup$
    – PiKindOfGuy
    2 hours ago














  • 1




    $begingroup$
    Viscosity is resistance to flow, oil flows more slowly than water, hence its more viscous
    $endgroup$
    – Triatticus
    3 hours ago










  • $begingroup$
    Have you read the Wikipedia article on viscosity? en.wikipedia.org/wiki/Viscosity
    $endgroup$
    – PiKindOfGuy
    2 hours ago








1




1




$begingroup$
Viscosity is resistance to flow, oil flows more slowly than water, hence its more viscous
$endgroup$
– Triatticus
3 hours ago




$begingroup$
Viscosity is resistance to flow, oil flows more slowly than water, hence its more viscous
$endgroup$
– Triatticus
3 hours ago












$begingroup$
Have you read the Wikipedia article on viscosity? en.wikipedia.org/wiki/Viscosity
$endgroup$
– PiKindOfGuy
2 hours ago




$begingroup$
Have you read the Wikipedia article on viscosity? en.wikipedia.org/wiki/Viscosity
$endgroup$
– PiKindOfGuy
2 hours ago










2 Answers
2






active

oldest

votes


















3












$begingroup$

The quality responsible for oil being "slippery" is called lubricity and it is very different from viscosity- although many oils that have high lubricity are also more viscous than water.



In very general terms, lubricity has to do with the ability of the lubricant to withstand being subjected to extremely high pressures in the gaps between (usually) metal parts that are sliding against one another, without allowing those metal surfaces to actually come into physical contact on extremely small distance scales. The ideal lubricant can form an extremely thin film in those zones of highest pressure which will not rupture, while still possessing a low enough viscosity so as to allow the lubricant itself to be sheared dynamically as the metal parts are sliding.



Since these conditions are often accompanied by high temperatures, the lubricant also has to withstand high temperatures without chemically breaking down or oxidizing. It also has to be non-corrosive to the metals it must be in contact with.






share|cite|improve this answer









$endgroup$





















    1












    $begingroup$

    Firstly, friction is a resistive force which acts between two surfaces in contact. Viscosity is fluid friction; the frictional force that acts between the layers of fluid particles or between an object immersed in the fluid and the fluid particles. Scientifically, the frictional force that acts between the layers of oil particles(viscosity of oil) is greater than the frictional force that acts between the layers of water(viscosity of water). The reason why oil is more slippery than water is due to its lubricity. Lubricity is the measure of the degree to which a fluid can withstand high pressures. The reason why you slip is because the oil on the floor cannot provide you with a force great enough to propel you forward. So fluids with a higher lubricity tend to fall you down more, while fluids with a lesser lubricity tend to give you a better chance of walking.






    share|cite|improve this answer








    New contributor




    Tak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
    Check out our Code of Conduct.






    $endgroup$













      Your Answer





      StackExchange.ifUsing("editor", function () {
      return StackExchange.using("mathjaxEditing", function () {
      StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
      StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
      });
      });
      }, "mathjax-editing");

      StackExchange.ready(function() {
      var channelOptions = {
      tags: "".split(" "),
      id: "151"
      };
      initTagRenderer("".split(" "), "".split(" "), channelOptions);

      StackExchange.using("externalEditor", function() {
      // Have to fire editor after snippets, if snippets enabled
      if (StackExchange.settings.snippets.snippetsEnabled) {
      StackExchange.using("snippets", function() {
      createEditor();
      });
      }
      else {
      createEditor();
      }
      });

      function createEditor() {
      StackExchange.prepareEditor({
      heartbeatType: 'answer',
      autoActivateHeartbeat: false,
      convertImagesToLinks: false,
      noModals: true,
      showLowRepImageUploadWarning: true,
      reputationToPostImages: null,
      bindNavPrevention: true,
      postfix: "",
      imageUploader: {
      brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
      contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
      allowUrls: true
      },
      noCode: true, onDemand: true,
      discardSelector: ".discard-answer"
      ,immediatelyShowMarkdownHelp:true
      });


      }
      });














      draft saved

      draft discarded


















      StackExchange.ready(
      function () {
      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fphysics.stackexchange.com%2fquestions%2f463636%2fwhy-is-oil-called-more-viscous-than-water-when-we-slip-on-oil-more-than-we-do-on%23new-answer', 'question_page');
      }
      );

      Post as a guest















      Required, but never shown

























      2 Answers
      2






      active

      oldest

      votes








      2 Answers
      2






      active

      oldest

      votes









      active

      oldest

      votes






      active

      oldest

      votes









      3












      $begingroup$

      The quality responsible for oil being "slippery" is called lubricity and it is very different from viscosity- although many oils that have high lubricity are also more viscous than water.



      In very general terms, lubricity has to do with the ability of the lubricant to withstand being subjected to extremely high pressures in the gaps between (usually) metal parts that are sliding against one another, without allowing those metal surfaces to actually come into physical contact on extremely small distance scales. The ideal lubricant can form an extremely thin film in those zones of highest pressure which will not rupture, while still possessing a low enough viscosity so as to allow the lubricant itself to be sheared dynamically as the metal parts are sliding.



      Since these conditions are often accompanied by high temperatures, the lubricant also has to withstand high temperatures without chemically breaking down or oxidizing. It also has to be non-corrosive to the metals it must be in contact with.






      share|cite|improve this answer









      $endgroup$


















        3












        $begingroup$

        The quality responsible for oil being "slippery" is called lubricity and it is very different from viscosity- although many oils that have high lubricity are also more viscous than water.



        In very general terms, lubricity has to do with the ability of the lubricant to withstand being subjected to extremely high pressures in the gaps between (usually) metal parts that are sliding against one another, without allowing those metal surfaces to actually come into physical contact on extremely small distance scales. The ideal lubricant can form an extremely thin film in those zones of highest pressure which will not rupture, while still possessing a low enough viscosity so as to allow the lubricant itself to be sheared dynamically as the metal parts are sliding.



        Since these conditions are often accompanied by high temperatures, the lubricant also has to withstand high temperatures without chemically breaking down or oxidizing. It also has to be non-corrosive to the metals it must be in contact with.






        share|cite|improve this answer









        $endgroup$
















          3












          3








          3





          $begingroup$

          The quality responsible for oil being "slippery" is called lubricity and it is very different from viscosity- although many oils that have high lubricity are also more viscous than water.



          In very general terms, lubricity has to do with the ability of the lubricant to withstand being subjected to extremely high pressures in the gaps between (usually) metal parts that are sliding against one another, without allowing those metal surfaces to actually come into physical contact on extremely small distance scales. The ideal lubricant can form an extremely thin film in those zones of highest pressure which will not rupture, while still possessing a low enough viscosity so as to allow the lubricant itself to be sheared dynamically as the metal parts are sliding.



          Since these conditions are often accompanied by high temperatures, the lubricant also has to withstand high temperatures without chemically breaking down or oxidizing. It also has to be non-corrosive to the metals it must be in contact with.






          share|cite|improve this answer









          $endgroup$



          The quality responsible for oil being "slippery" is called lubricity and it is very different from viscosity- although many oils that have high lubricity are also more viscous than water.



          In very general terms, lubricity has to do with the ability of the lubricant to withstand being subjected to extremely high pressures in the gaps between (usually) metal parts that are sliding against one another, without allowing those metal surfaces to actually come into physical contact on extremely small distance scales. The ideal lubricant can form an extremely thin film in those zones of highest pressure which will not rupture, while still possessing a low enough viscosity so as to allow the lubricant itself to be sheared dynamically as the metal parts are sliding.



          Since these conditions are often accompanied by high temperatures, the lubricant also has to withstand high temperatures without chemically breaking down or oxidizing. It also has to be non-corrosive to the metals it must be in contact with.







          share|cite|improve this answer












          share|cite|improve this answer



          share|cite|improve this answer










          answered 1 hour ago









          niels nielsenniels nielsen

          19.5k52960




          19.5k52960























              1












              $begingroup$

              Firstly, friction is a resistive force which acts between two surfaces in contact. Viscosity is fluid friction; the frictional force that acts between the layers of fluid particles or between an object immersed in the fluid and the fluid particles. Scientifically, the frictional force that acts between the layers of oil particles(viscosity of oil) is greater than the frictional force that acts between the layers of water(viscosity of water). The reason why oil is more slippery than water is due to its lubricity. Lubricity is the measure of the degree to which a fluid can withstand high pressures. The reason why you slip is because the oil on the floor cannot provide you with a force great enough to propel you forward. So fluids with a higher lubricity tend to fall you down more, while fluids with a lesser lubricity tend to give you a better chance of walking.






              share|cite|improve this answer








              New contributor




              Tak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
              Check out our Code of Conduct.






              $endgroup$


















                1












                $begingroup$

                Firstly, friction is a resistive force which acts between two surfaces in contact. Viscosity is fluid friction; the frictional force that acts between the layers of fluid particles or between an object immersed in the fluid and the fluid particles. Scientifically, the frictional force that acts between the layers of oil particles(viscosity of oil) is greater than the frictional force that acts between the layers of water(viscosity of water). The reason why oil is more slippery than water is due to its lubricity. Lubricity is the measure of the degree to which a fluid can withstand high pressures. The reason why you slip is because the oil on the floor cannot provide you with a force great enough to propel you forward. So fluids with a higher lubricity tend to fall you down more, while fluids with a lesser lubricity tend to give you a better chance of walking.






                share|cite|improve this answer








                New contributor




                Tak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                Check out our Code of Conduct.






                $endgroup$
















                  1












                  1








                  1





                  $begingroup$

                  Firstly, friction is a resistive force which acts between two surfaces in contact. Viscosity is fluid friction; the frictional force that acts between the layers of fluid particles or between an object immersed in the fluid and the fluid particles. Scientifically, the frictional force that acts between the layers of oil particles(viscosity of oil) is greater than the frictional force that acts between the layers of water(viscosity of water). The reason why oil is more slippery than water is due to its lubricity. Lubricity is the measure of the degree to which a fluid can withstand high pressures. The reason why you slip is because the oil on the floor cannot provide you with a force great enough to propel you forward. So fluids with a higher lubricity tend to fall you down more, while fluids with a lesser lubricity tend to give you a better chance of walking.






                  share|cite|improve this answer








                  New contributor




                  Tak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.






                  $endgroup$



                  Firstly, friction is a resistive force which acts between two surfaces in contact. Viscosity is fluid friction; the frictional force that acts between the layers of fluid particles or between an object immersed in the fluid and the fluid particles. Scientifically, the frictional force that acts between the layers of oil particles(viscosity of oil) is greater than the frictional force that acts between the layers of water(viscosity of water). The reason why oil is more slippery than water is due to its lubricity. Lubricity is the measure of the degree to which a fluid can withstand high pressures. The reason why you slip is because the oil on the floor cannot provide you with a force great enough to propel you forward. So fluids with a higher lubricity tend to fall you down more, while fluids with a lesser lubricity tend to give you a better chance of walking.







                  share|cite|improve this answer








                  New contributor




                  Tak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.









                  share|cite|improve this answer



                  share|cite|improve this answer






                  New contributor




                  Tak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.









                  answered 1 hour ago









                  TakTak

                  464




                  464




                  New contributor




                  Tak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.





                  New contributor





                  Tak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.






                  Tak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.






























                      draft saved

                      draft discarded




















































                      Thanks for contributing an answer to Physics Stack Exchange!


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid …



                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.


                      Use MathJax to format equations. MathJax reference.


                      To learn more, see our tips on writing great answers.




                      draft saved


                      draft discarded














                      StackExchange.ready(
                      function () {
                      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fphysics.stackexchange.com%2fquestions%2f463636%2fwhy-is-oil-called-more-viscous-than-water-when-we-slip-on-oil-more-than-we-do-on%23new-answer', 'question_page');
                      }
                      );

                      Post as a guest















                      Required, but never shown





















































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown

































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown







                      -

                      Popular posts from this blog

                      Ponta tanko

                      Image
                      Usona ponta tanko M60A1 Ponta tanko estas, simile kiel kirasita savveturilo, inter specialaj kirasitaj transportiloj. Kiel pontaj tankoj eblas konsideri ĉiujn memmovigaj rimedoj ebligantaj superi obstaklojn ĝis larĝeco 24 metroj rekte en spaco de bataloperacoj. Ties ĉefa tasko estas ebligi al la propraj taĉmentoj daŭrigi en rapida antaŭenirado sen senbezona reteniĝo. El tio pli-malpli rezultas taktikaj-teknikaj postuloj, kiujn ili devas plenumi. Precipe temas pri kapablo operacii komune kun unue-sinsekvaj taĉmentoj kaj transpontigi obstaklojn dum kelke da minutoj. This page is only for reference, If you need detailed information, please check here
                      Read more

                      Tantalo (mitologio)

                      Image
                      Ĉi tiu artikolo temas pri mitologio. Por aliaj signifoj vidu la paĝon Tantalo (apartigilo) . Tantalo , laŭ Gioacchino Assereto. Laŭ la helena mitologio, Tantalo (el la greka Τάνταλος , ŝancelanta aŭ tre malfeliĉa ) estis filo de Zeŭso kaj la oceanidino Pluto, laŭ la plej divastigata versio. Li estis reĝo de Frigio [1] aŭ de la monto Sipilo, en Lidio (Malgrandazio) [2] kaj post sia morto li suferis eternan torturadon ĉe la Tartaro, la plej profunda parto de Hadeso, rezervita por la plej perversaj homoj. Tamen, kelkaj rakontoj asertas ke li estis reĝo de Argo aŭ de Korinto [3] , aŭ ke li migris norden el la monto Sipilo por akiri la tronon de Paflagonio, el kie Ilo forpelis lin pro tio, ke Tantalo forkaptis kaj seksperfortis lian fraton Ganimedon [4] , kaj tiel ofendis la diojn. Verŝajne li ankaŭ regis urbon en okcidenta Anatolio, kiun oni nomis Tantalis [5] pro li, aŭ Sipilo , pro la monto sur kies flanko ankoraŭ staras ĝiaj ruinaĵoj [6] . Laŭ la geografiisto Strabo,...
                      Read more

                      Erzsébet Schaár

                      Image
                      Erzsébet Schaár Memportreto de Erzsébet Schaár en Pécs Personaj informoj Naskiĝo 27-an de julio 1908 ( 1908-07-27 ) en Budafok Morto 29-an de aŭgusto 1975 ( 1975-08-29 ) (67-jara) en Budapeŝto Ŝtataneco Hungario Profesio skulptisto Familianoj Edz(in)o Tibor Vilt v   •   d   •   r Erzsébet Schaár [erĵEbet ŝAr], laŭ hungarlingve kutima sinsekvo Schaár Erzsébet estis hungara skulptisto. Ŝia edzo estis Tibor Vilt. Déryné Széppataki Róza en Miskolc fare de Erzsébet Schaár Erzsébet Schaár [1] naskiĝis la 27-an de julio 1908 en Budafok, ŝi mortis la 29-an de aŭgusto 1975 en Budapeŝto. Enhavo 1 Biografio 2 Elektitaj solaj ekspozicioj 3 Elektitaj kolektivaj ekspozicioj 4 Elektitaj skulptaĵoj 5 Elektitaj disĉiploj 6 Fontoj 7 Referencoj Biografio | Erzsébet Schaár studis en Industriarta Lernejo, poste en Reĝa Belarta Altlernejo (1924-1926). Ŝia ĉefinstruisto estis Zsig...
                      Read more