Center align columns in table ignoring minus signs?
I have some tables of numbers, most of which are small (0, 1, -1), but occasionally I have fractions. If I just has 0, 1, -1's I'd right align so the $-$ signs will line up, but the fractions throw things off. Center align doesn't look great either, nor does left align. Here is a small example of a right and center align: 
begin{tabular}{rr}
$frac 1{24}$ & $-frac 1{24}$ \
$1$ & $-1$ \
$-1$ & $0$ \
end{tabular}
quad
begin{tabular}{cc}
$frac 1{24}$ & $-frac 1{24}$ \
$1$ & $-1$ \
$-1$ & $0$ \
end{tabular}
Can I center align the numbers without the signs, so the top two rows will look like they do on the right in the example above, and the bottom two rows will look like the do on the left in the above example?
tables horizontal-alignment
asked 7 hours ago
KimballKimball
1507
add a comment |
I have some tables of numbers, most of which are small (0, 1, -1), but occasionally I have fractions. If I just has 0, 1, -1's I'd right align so the $-$ signs will line up, but the fractions throw things off. Center align doesn't look great either, nor does left align. Here is a small example of a right and center align:
begin{tabular}{rr}
$frac 1{24}$ & $-frac 1{24}$ \
$1$ & $-1$ \
$-1$ & $0$ \
end{tabular}
quad
begin{tabular}{cc}
$frac 1{24}$ & $-frac 1{24}$ \
$1$ & $-1$ \
$-1$ & $0$ \
end{tabular}
Can I center align the numbers without the signs, so the top two rows will look like they do on the right in the example above, and the bottom two rows will look like the do on the left in the above example?
tables horizontal-alignment
asked 7 hours ago
KimballKimball
1507
add a comment |
I have some tables of numbers, most of which are small (0, 1, -1), but occasionally I have fractions. If I just has 0, 1, -1's I'd right align so the $-$ signs will line up, but the fractions throw things off. Center align doesn't look great either, nor does left align. Here is a small example of a right and center align:
begin{tabular}{rr}
$frac 1{24}$ & $-frac 1{24}$ \
$1$ & $-1$ \
$-1$ & $0$ \
end{tabular}
quad
begin{tabular}{cc}
$frac 1{24}$ & $-frac 1{24}$ \
$1$ & $-1$ \
$-1$ & $0$ \
end{tabular}
Can I center align the numbers without the signs, so the top two rows will look like they do on the right in the example above, and the bottom two rows will look like the do on the left in the above example?
tables horizontal-alignment
asked 7 hours ago
KimballKimball
1507
I have some tables of numbers, most of which are small (0, 1, -1), but occasionally I have fractions. If I just has 0, 1, -1's I'd right align so the $-$ signs will line up, but the fractions throw things off. Center align doesn't look great either, nor does left align. Here is a small example of a right and center align:
begin{tabular}{rr}
$frac 1{24}$ & $-frac 1{24}$ \
$1$ & $-1$ \
$-1$ & $0$ \
end{tabular}
quad
begin{tabular}{cc}
$frac 1{24}$ & $-frac 1{24}$ \
$1$ & $-1$ \
$-1$ & $0$ \
end{tabular}
Can I center align the numbers without the signs, so the top two rows will look like they do on the right in the example above, and the bottom two rows will look like the do on the left in the above example?
tables horizontal-alignment
tables horizontal-alignment
asked 7 hours ago
KimballKimball
1507
asked 7 hours ago
KimballKimball
1507
asked 7 hours ago
KimballKimball
1507
asked 7 hours ago
KimballKimball
1507
asked 7 hours ago
KimballKimball
1507
1507
add a comment |
add a comment |
3 Answers
3
active
oldest
votes
With phantom you can insert an invisible -:
documentclass{article}
begin{document}
begin{tabular}{cc}
$phantom{-}frac 1{24}$ & $-frac 1{24}$ \
$phantom{-}1$ & $-1$ \
$-1$ & $phantom{-}0$ \
end{tabular}
end{document}
If your table contains only (mostly) math, you might want to use array instead of tabular.
answered 7 hours ago
leandriisleandriis
11.3k1733
add a comment |
documentclass{article}
usepackage{mathtools}
begin{document}
begin{tabular}{cc}
$frac 1{24}$ & $mathllap-frac 1{24}$ \
$1$ & $mathllap-1$ \
$mathllap-1$ & $0$ \
end{tabular}
end{document}
answered 7 hours ago
David CarlisleDavid Carlisle
499k4111451895
add a comment |
Here I make - active (inside a limited group) and define it as a mathllap. I use a TABstack with enough column separation to allow for the -.
documentclass{article}
usepackage{tabstackengine,mathtools}
TABstackMath
begin{document}
bgroup
setstackgap{L}{16pt}
setstacktabbedgap{13pt}
letsvm-
catcode`-=active
def-{mathllap{svm}}
Matrixstack{frac 1{24} & -frac 1{24} \ 1 & -1 \ -1 & 0}
quadMatrixstack{frac 1{24} & -frac 1{24} \ 1 & -1 \ -1 & 0 }
egroup
end{document}
answered 7 hours ago
Steven B. SegletesSteven B. Segletes
162k9206418
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "85"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f485032%2fcenter-align-columns-in-table-ignoring-minus-signs%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
With phantom you can insert an invisible -:
documentclass{article}
begin{document}
begin{tabular}{cc}
$phantom{-}frac 1{24}$ & $-frac 1{24}$ \
$phantom{-}1$ & $-1$ \
$-1$ & $phantom{-}0$ \
end{tabular}
end{document}
If your table contains only (mostly) math, you might want to use array instead of tabular.
answered 7 hours ago
leandriisleandriis
11.3k1733
add a comment |
With phantom you can insert an invisible -:
documentclass{article}
begin{document}
begin{tabular}{cc}
$phantom{-}frac 1{24}$ & $-frac 1{24}$ \
$phantom{-}1$ & $-1$ \
$-1$ & $phantom{-}0$ \
end{tabular}
end{document}
If your table contains only (mostly) math, you might want to use array instead of tabular.
answered 7 hours ago
leandriisleandriis
11.3k1733
add a comment |
With phantom you can insert an invisible -:
documentclass{article}
begin{document}
begin{tabular}{cc}
$phantom{-}frac 1{24}$ & $-frac 1{24}$ \
$phantom{-}1$ & $-1$ \
$-1$ & $phantom{-}0$ \
end{tabular}
end{document}
If your table contains only (mostly) math, you might want to use array instead of tabular.
answered 7 hours ago
leandriisleandriis
11.3k1733
With phantom you can insert an invisible -:
documentclass{article}
begin{document}
begin{tabular}{cc}
$phantom{-}frac 1{24}$ & $-frac 1{24}$ \
$phantom{-}1$ & $-1$ \
$-1$ & $phantom{-}0$ \
end{tabular}
end{document}
If your table contains only (mostly) math, you might want to use array instead of tabular.
answered 7 hours ago
leandriisleandriis
11.3k1733
answered 7 hours ago
leandriisleandriis
11.3k1733
answered 7 hours ago
leandriisleandriis
11.3k1733
answered 7 hours ago
leandriisleandriis
11.3k1733
11.3k1733
add a comment |
add a comment |
documentclass{article}
usepackage{mathtools}
begin{document}
begin{tabular}{cc}
$frac 1{24}$ & $mathllap-frac 1{24}$ \
$1$ & $mathllap-1$ \
$mathllap-1$ & $0$ \
end{tabular}
end{document}
answered 7 hours ago
David CarlisleDavid Carlisle
499k4111451895
add a comment |
documentclass{article}
usepackage{mathtools}
begin{document}
begin{tabular}{cc}
$frac 1{24}$ & $mathllap-frac 1{24}$ \
$1$ & $mathllap-1$ \
$mathllap-1$ & $0$ \
end{tabular}
end{document}
answered 7 hours ago
David CarlisleDavid Carlisle
499k4111451895
add a comment |
documentclass{article}
usepackage{mathtools}
begin{document}
begin{tabular}{cc}
$frac 1{24}$ & $mathllap-frac 1{24}$ \
$1$ & $mathllap-1$ \
$mathllap-1$ & $0$ \
end{tabular}
end{document}
answered 7 hours ago
David CarlisleDavid Carlisle
499k4111451895
documentclass{article}
usepackage{mathtools}
begin{document}
begin{tabular}{cc}
$frac 1{24}$ & $mathllap-frac 1{24}$ \
$1$ & $mathllap-1$ \
$mathllap-1$ & $0$ \
end{tabular}
end{document}
answered 7 hours ago
David CarlisleDavid Carlisle
499k4111451895
answered 7 hours ago
David CarlisleDavid Carlisle
499k4111451895
answered 7 hours ago
David CarlisleDavid Carlisle
499k4111451895
answered 7 hours ago
David CarlisleDavid Carlisle
499k4111451895
499k4111451895
add a comment |
add a comment |
Here I make - active (inside a limited group) and define it as a mathllap. I use a TABstack with enough column separation to allow for the -.
documentclass{article}
usepackage{tabstackengine,mathtools}
TABstackMath
begin{document}
bgroup
setstackgap{L}{16pt}
setstacktabbedgap{13pt}
letsvm-
catcode`-=active
def-{mathllap{svm}}
Matrixstack{frac 1{24} & -frac 1{24} \ 1 & -1 \ -1 & 0}
quadMatrixstack{frac 1{24} & -frac 1{24} \ 1 & -1 \ -1 & 0 }
egroup
end{document}
answered 7 hours ago
Steven B. SegletesSteven B. Segletes
162k9206418
add a comment |
Here I make - active (inside a limited group) and define it as a mathllap. I use a TABstack with enough column separation to allow for the -.
documentclass{article}
usepackage{tabstackengine,mathtools}
TABstackMath
begin{document}
bgroup
setstackgap{L}{16pt}
setstacktabbedgap{13pt}
letsvm-
catcode`-=active
def-{mathllap{svm}}
Matrixstack{frac 1{24} & -frac 1{24} \ 1 & -1 \ -1 & 0}
quadMatrixstack{frac 1{24} & -frac 1{24} \ 1 & -1 \ -1 & 0 }
egroup
end{document}
answered 7 hours ago
Steven B. SegletesSteven B. Segletes
162k9206418
add a comment |
Here I make - active (inside a limited group) and define it as a mathllap. I use a TABstack with enough column separation to allow for the -.
documentclass{article}
usepackage{tabstackengine,mathtools}
TABstackMath
begin{document}
bgroup
setstackgap{L}{16pt}
setstacktabbedgap{13pt}
letsvm-
catcode`-=active
def-{mathllap{svm}}
Matrixstack{frac 1{24} & -frac 1{24} \ 1 & -1 \ -1 & 0}
quadMatrixstack{frac 1{24} & -frac 1{24} \ 1 & -1 \ -1 & 0 }
egroup
end{document}
answered 7 hours ago
Steven B. SegletesSteven B. Segletes
162k9206418
Here I make - active (inside a limited group) and define it as a mathllap. I use a TABstack with enough column separation to allow for the -.
documentclass{article}
usepackage{tabstackengine,mathtools}
TABstackMath
begin{document}
bgroup
setstackgap{L}{16pt}
setstacktabbedgap{13pt}
letsvm-
catcode`-=active
def-{mathllap{svm}}
Matrixstack{frac 1{24} & -frac 1{24} \ 1 & -1 \ -1 & 0}
quadMatrixstack{frac 1{24} & -frac 1{24} \ 1 & -1 \ -1 & 0 }
egroup
end{document}
answered 7 hours ago
Steven B. SegletesSteven B. Segletes
162k9206418
edited 7 hours ago
answered 7 hours ago
Steven B. SegletesSteven B. Segletes
162k9206418
answered 7 hours ago
Steven B. SegletesSteven B. Segletes
162k9206418
answered 7 hours ago
Steven B. SegletesSteven B. Segletes
162k9206418
162k9206418
add a comment |
add a comment |
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f485032%2fcenter-align-columns-in-table-ignoring-minus-signs%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
