How to fit a screw into a drilled big hole on wall?
I am fitting a window blind on a wall.
I have drilled a hole on wall bigger than the screw size.
The drilled hole on the wall has a diameter of 6mm
The screw I try to fit in has a diameter of 3mm
Here is the image of the drilled hole o the wall:
Here is the image of the screw with the window blind holder:
How do I fit the screw tightly and safely on the large drilled hole on wall?
screws drill blinds
New contributor
hunterex is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I am fitting a window blind on a wall.
I have drilled a hole on wall bigger than the screw size.
The drilled hole on the wall has a diameter of 6mm
The screw I try to fit in has a diameter of 3mm
Here is the image of the drilled hole o the wall:
Here is the image of the screw with the window blind holder:
How do I fit the screw tightly and safely on the large drilled hole on wall?
screws drill blinds
New contributor
hunterex is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Does the metal bracket offer more hole locations than you actually need? If so, perhaps you could just drill a new hole...
– unutbu
52 mins ago
@unutbu, hole location at the top are not possible as the wall structure is weak. So the better option is to place the screw at the side
– hunterex
45 mins ago
add a comment |
I am fitting a window blind on a wall.
I have drilled a hole on wall bigger than the screw size.
The drilled hole on the wall has a diameter of 6mm
The screw I try to fit in has a diameter of 3mm
Here is the image of the drilled hole o the wall:
Here is the image of the screw with the window blind holder:
How do I fit the screw tightly and safely on the large drilled hole on wall?
screws drill blinds
New contributor
hunterex is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I am fitting a window blind on a wall.
I have drilled a hole on wall bigger than the screw size.
The drilled hole on the wall has a diameter of 6mm
The screw I try to fit in has a diameter of 3mm
Here is the image of the drilled hole o the wall:
Here is the image of the screw with the window blind holder:
How do I fit the screw tightly and safely on the large drilled hole on wall?
screws drill blinds
screws drill blinds
New contributor
hunterex is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
hunterex is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
hunterex is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 1 hour ago
hunterexhunterex
61
61
New contributor
hunterex is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
hunterex is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
hunterex is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Does the metal bracket offer more hole locations than you actually need? If so, perhaps you could just drill a new hole...
– unutbu
52 mins ago
@unutbu, hole location at the top are not possible as the wall structure is weak. So the better option is to place the screw at the side
– hunterex
45 mins ago
add a comment |
Does the metal bracket offer more hole locations than you actually need? If so, perhaps you could just drill a new hole...
– unutbu
52 mins ago
@unutbu, hole location at the top are not possible as the wall structure is weak. So the better option is to place the screw at the side
– hunterex
45 mins ago
Does the metal bracket offer more hole locations than you actually need? If so, perhaps you could just drill a new hole...
– unutbu
52 mins ago
Does the metal bracket offer more hole locations than you actually need? If so, perhaps you could just drill a new hole...
– unutbu
52 mins ago
@unutbu, hole location at the top are not possible as the wall structure is weak. So the better option is to place the screw at the side
– hunterex
45 mins ago
@unutbu, hole location at the top are not possible as the wall structure is weak. So the better option is to place the screw at the side
– hunterex
45 mins ago
add a comment |
1 Answer
1
active
oldest
votes
The wall looks like plaster or drywall (aka sheetrock). You insert an "anchor" into the hole and thread a screw into the anchor. plastic anchors for plaster or drywall
But if there is solid wood of sufficient dimensions behind the plaster you use a long enough screw to thread into the wood. In your case, if you have good wood behind the plaster, but you have drilled too large a hole for the screw, just use a long enough anchor to fit an inch or more into the wood and thread in the screw. The anchor will expand as the screw goes in and will grip the sides of the hole in the wood.
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "73"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
hunterex is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f155330%2fhow-to-fit-a-screw-into-a-drilled-big-hole-on-wall%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
The wall looks like plaster or drywall (aka sheetrock). You insert an "anchor" into the hole and thread a screw into the anchor. plastic anchors for plaster or drywall
But if there is solid wood of sufficient dimensions behind the plaster you use a long enough screw to thread into the wood. In your case, if you have good wood behind the plaster, but you have drilled too large a hole for the screw, just use a long enough anchor to fit an inch or more into the wood and thread in the screw. The anchor will expand as the screw goes in and will grip the sides of the hole in the wood.
add a comment |
The wall looks like plaster or drywall (aka sheetrock). You insert an "anchor" into the hole and thread a screw into the anchor. plastic anchors for plaster or drywall
But if there is solid wood of sufficient dimensions behind the plaster you use a long enough screw to thread into the wood. In your case, if you have good wood behind the plaster, but you have drilled too large a hole for the screw, just use a long enough anchor to fit an inch or more into the wood and thread in the screw. The anchor will expand as the screw goes in and will grip the sides of the hole in the wood.
add a comment |
The wall looks like plaster or drywall (aka sheetrock). You insert an "anchor" into the hole and thread a screw into the anchor. plastic anchors for plaster or drywall
But if there is solid wood of sufficient dimensions behind the plaster you use a long enough screw to thread into the wood. In your case, if you have good wood behind the plaster, but you have drilled too large a hole for the screw, just use a long enough anchor to fit an inch or more into the wood and thread in the screw. The anchor will expand as the screw goes in and will grip the sides of the hole in the wood.
The wall looks like plaster or drywall (aka sheetrock). You insert an "anchor" into the hole and thread a screw into the anchor. plastic anchors for plaster or drywall
But if there is solid wood of sufficient dimensions behind the plaster you use a long enough screw to thread into the wood. In your case, if you have good wood behind the plaster, but you have drilled too large a hole for the screw, just use a long enough anchor to fit an inch or more into the wood and thread in the screw. The anchor will expand as the screw goes in and will grip the sides of the hole in the wood.
answered 1 hour ago
Jim StewartJim Stewart
10.9k11230
10.9k11230
add a comment |
add a comment |
hunterex is a new contributor. Be nice, and check out our Code of Conduct.
hunterex is a new contributor. Be nice, and check out our Code of Conduct.
hunterex is a new contributor. Be nice, and check out our Code of Conduct.
hunterex is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Home Improvement Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f155330%2fhow-to-fit-a-screw-into-a-drilled-big-hole-on-wall%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Does the metal bracket offer more hole locations than you actually need? If so, perhaps you could just drill a new hole...
– unutbu
52 mins ago
@unutbu, hole location at the top are not possible as the wall structure is weak. So the better option is to place the screw at the side
– hunterex
45 mins ago