Why does the Cisco show run command not show the full version, while the show version command does?
Is there any reason why Cisco show run does not show the full version which is 16.3.7 in this example?
IOSSW#show running-config | include ersion
version 16.3
while show version does?
IOSSW#show version
...
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48T 16.3.7 CAT3K_CAA-UNIVERSALK9 BUNDLE
...
IOSSW#
cisco cisco-ios cisco-commands
edited 36 mins ago
Ron Maupin♦
68.8k1369125
asked 51 mins ago
user11392987user11392987
213
New contributor
user11392987 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Is there any reason why Cisco show run does not show the full version which is 16.3.7 in this example?
IOSSW#show running-config | include ersion
version 16.3
while show version does?
IOSSW#show version
...
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48T 16.3.7 CAT3K_CAA-UNIVERSALK9 BUNDLE
...
IOSSW#
cisco cisco-ios cisco-commands
edited 36 mins ago
Ron Maupin♦
68.8k1369125
asked 51 mins ago
user11392987user11392987
213
New contributor
user11392987 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Is there any reason why Cisco show run does not show the full version which is 16.3.7 in this example?
IOSSW#show running-config | include ersion
version 16.3
while show version does?
IOSSW#show version
...
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48T 16.3.7 CAT3K_CAA-UNIVERSALK9 BUNDLE
...
IOSSW#
cisco cisco-ios cisco-commands
edited 36 mins ago
Ron Maupin♦
68.8k1369125
asked 51 mins ago
user11392987user11392987
213
New contributor
user11392987 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Is there any reason why Cisco show run does not show the full version which is 16.3.7 in this example?
IOSSW#show running-config | include ersion
version 16.3
while show version does?
IOSSW#show version
...
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48T 16.3.7 CAT3K_CAA-UNIVERSALK9 BUNDLE
...
IOSSW#
cisco cisco-ios cisco-commands
cisco cisco-ios cisco-commands
edited 36 mins ago
Ron Maupin♦
68.8k1369125
asked 51 mins ago
user11392987user11392987
213
New contributor
user11392987 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 36 mins ago
Ron Maupin♦
68.8k1369125
asked 51 mins ago
user11392987user11392987
213
New contributor
user11392987 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 36 mins ago
Ron Maupin♦
68.8k1369125
edited 36 mins ago
Ron Maupin♦
68.8k1369125
edited 36 mins ago
Ron Maupin♦
68.8k1369125
68.8k1369125
asked 51 mins ago
user11392987user11392987
213
New contributor
user11392987 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 51 mins ago
user11392987user11392987
213
asked 51 mins ago
user11392987user11392987
213
213
New contributor
user11392987 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
user11392987 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
user11392987 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
Is there any reason why Cisco show run does not show the full version which is 16.3.7 in this example?
For the simple reason that the only the major and minor versions are necessary for a complete understanding of the configuration. While there may be feature changes and/or enhancements between 16.2 and 16.3, changes in the build/revision should not impact the configuration in any way.
Stated another way, the difference from 16.3.6 to 16.3.7 may include fixes to caveats (bugs, flaws, and vulnerabilities), but this should not in any way impact what the configuration actually means to the device.
So when you do a show running-config it is helpful to know the major and minor versions to understand the configuration. However if you need the full version, you should use the show version command.
answered 16 mins ago
YLearn♦YLearn
22.5k548106
add a comment |
You are comparing apples and oranges. The show running-config command gives you a simplified version number that the beginning, but it is designed to show you the configuration, not the full version:
Current configuration : 15095 bytes
!
version 15.5
The show version command gives you more information about the versions in the device, but nothing about the configuration.
The two commands are simply aimed at different information. If you have a problem with that, you must take it up with Cisco. There is nothing we can do about it here.
answered 41 mins ago
Ron Maupin♦Ron Maupin
68.8k1369125
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "496"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
user11392987 is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fnetworkengineering.stackexchange.com%2fquestions%2f58679%2fwhy-does-the-cisco-show-run-command-not-show-the-full-version-while-the-show-ve%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Is there any reason why Cisco show run does not show the full version which is 16.3.7 in this example?
For the simple reason that the only the major and minor versions are necessary for a complete understanding of the configuration. While there may be feature changes and/or enhancements between 16.2 and 16.3, changes in the build/revision should not impact the configuration in any way.
Stated another way, the difference from 16.3.6 to 16.3.7 may include fixes to caveats (bugs, flaws, and vulnerabilities), but this should not in any way impact what the configuration actually means to the device.
So when you do a show running-config it is helpful to know the major and minor versions to understand the configuration. However if you need the full version, you should use the show version command.
answered 16 mins ago
YLearn♦YLearn
22.5k548106
add a comment |
Is there any reason why Cisco show run does not show the full version which is 16.3.7 in this example?
For the simple reason that the only the major and minor versions are necessary for a complete understanding of the configuration. While there may be feature changes and/or enhancements between 16.2 and 16.3, changes in the build/revision should not impact the configuration in any way.
Stated another way, the difference from 16.3.6 to 16.3.7 may include fixes to caveats (bugs, flaws, and vulnerabilities), but this should not in any way impact what the configuration actually means to the device.
So when you do a show running-config it is helpful to know the major and minor versions to understand the configuration. However if you need the full version, you should use the show version command.
answered 16 mins ago
YLearn♦YLearn
22.5k548106
add a comment |
Is there any reason why Cisco show run does not show the full version which is 16.3.7 in this example?
For the simple reason that the only the major and minor versions are necessary for a complete understanding of the configuration. While there may be feature changes and/or enhancements between 16.2 and 16.3, changes in the build/revision should not impact the configuration in any way.
Stated another way, the difference from 16.3.6 to 16.3.7 may include fixes to caveats (bugs, flaws, and vulnerabilities), but this should not in any way impact what the configuration actually means to the device.
So when you do a show running-config it is helpful to know the major and minor versions to understand the configuration. However if you need the full version, you should use the show version command.
answered 16 mins ago
YLearn♦YLearn
22.5k548106
Is there any reason why Cisco show run does not show the full version which is 16.3.7 in this example?
For the simple reason that the only the major and minor versions are necessary for a complete understanding of the configuration. While there may be feature changes and/or enhancements between 16.2 and 16.3, changes in the build/revision should not impact the configuration in any way.
Stated another way, the difference from 16.3.6 to 16.3.7 may include fixes to caveats (bugs, flaws, and vulnerabilities), but this should not in any way impact what the configuration actually means to the device.
So when you do a show running-config it is helpful to know the major and minor versions to understand the configuration. However if you need the full version, you should use the show version command.
answered 16 mins ago
YLearn♦YLearn
22.5k548106
edited 7 mins ago
answered 16 mins ago
YLearn♦YLearn
22.5k548106
answered 16 mins ago
YLearn♦YLearn
22.5k548106
answered 16 mins ago
YLearn♦YLearn
22.5k548106
22.5k548106
add a comment |
add a comment |
You are comparing apples and oranges. The show running-config command gives you a simplified version number that the beginning, but it is designed to show you the configuration, not the full version:
Current configuration : 15095 bytes
!
version 15.5
The show version command gives you more information about the versions in the device, but nothing about the configuration.
The two commands are simply aimed at different information. If you have a problem with that, you must take it up with Cisco. There is nothing we can do about it here.
answered 41 mins ago
Ron Maupin♦Ron Maupin
68.8k1369125
add a comment |
You are comparing apples and oranges. The show running-config command gives you a simplified version number that the beginning, but it is designed to show you the configuration, not the full version:
Current configuration : 15095 bytes
!
version 15.5
The show version command gives you more information about the versions in the device, but nothing about the configuration.
The two commands are simply aimed at different information. If you have a problem with that, you must take it up with Cisco. There is nothing we can do about it here.
answered 41 mins ago
Ron Maupin♦Ron Maupin
68.8k1369125
add a comment |
You are comparing apples and oranges. The show running-config command gives you a simplified version number that the beginning, but it is designed to show you the configuration, not the full version:
Current configuration : 15095 bytes
!
version 15.5
The show version command gives you more information about the versions in the device, but nothing about the configuration.
The two commands are simply aimed at different information. If you have a problem with that, you must take it up with Cisco. There is nothing we can do about it here.
answered 41 mins ago
Ron Maupin♦Ron Maupin
68.8k1369125
You are comparing apples and oranges. The show running-config command gives you a simplified version number that the beginning, but it is designed to show you the configuration, not the full version:
Current configuration : 15095 bytes
!
version 15.5
The show version command gives you more information about the versions in the device, but nothing about the configuration.
The two commands are simply aimed at different information. If you have a problem with that, you must take it up with Cisco. There is nothing we can do about it here.
answered 41 mins ago
Ron Maupin♦Ron Maupin
68.8k1369125
answered 41 mins ago
Ron Maupin♦Ron Maupin
68.8k1369125
answered 41 mins ago
Ron Maupin♦Ron Maupin
68.8k1369125
answered 41 mins ago
Ron Maupin♦Ron Maupin
68.8k1369125
68.8k1369125
add a comment |
add a comment |
user11392987 is a new contributor. Be nice, and check out our Code of Conduct.
user11392987 is a new contributor. Be nice, and check out our Code of Conduct.
user11392987 is a new contributor. Be nice, and check out our Code of Conduct.
user11392987 is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Network Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fnetworkengineering.stackexchange.com%2fquestions%2f58679%2fwhy-does-the-cisco-show-run-command-not-show-the-full-version-while-the-show-ve%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
